✨ New Arrivals Just Dropped!Explore
HomeStore

Antec Performance 1 FT ARGB - EATX Full Tower Case in Black

Product image 1
1 / 18

Antec Performance 1 FT ARGB - EATX Full Tower Case in Black

Full Tower, E-ATX, ATX, Micro-ATX, ITX, Steel + Plastic + Glass, 522 x 230 x 522 mm (DWH)

SYSTEM STATUS WITH A GLANCE
Temperature Display

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.

The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.

Attention: The Antec iUinity software must be installed.

ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.

I/O Panel
- Including the mainstream Type-C(10Gbps) port for high-speed transfer.
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.

PC SHOWCASE
4mm tempered glass & perforated solid steel

Left panel adopts tempered glass for better PC showcase visual effects.
Right solid panel is bottom-perforated to enhance heat dissipation and ventilation.

EVERYTHING ORGANIZED
Cable Management on Point

Spacious cable management for efficient wire organization.

There are ten sets of velcro straps for easy cable management.
1. Three sets of velcro straps for fan & I/O cable routing.
2. Five velcro straps for hardware and power supply cables.
3. Two velcro straps at the rear for rear I/O cable routing.

Easy Installation
Removable Top Cooling Bracket

PRE-INSTALLED4 x TRANQUILSILENT ARGB FANS

MORE TRANQUIL, MORE AIRFLOW

Unique fan blade and frame design offers powerful airflow with low noise accomplished.

Exquisite craftsmanship
Minimal clearance between fan frame and blades,
achieving maximum operational efficiency.

Vibration-Absorbing & Anti-Noise Pads
Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.

BEST DUST PREVENTION DESIGN
Exquisite Steel Mesh

The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.

POWERFUL AIRFLOW PATH DESIGN
Best Airflow Path for GPU Cooling

Airflow-enhancing mesh front panel provides massive air.

Ample mesh at the bottom and bottom-right side, and the availability of fans installed on the meshed PSU shroud together provide the best performance for the GPU cooling.

- Top: Magnetic dust filter
- Front: Magnetic & clip-on dust filter
- Bottom: Full-sized pull-out dust filter
- Side: Magnetic dust filter

HIGHLY COMPATIBLE FULL-TOWER PC CASE
Supports RTX 40 Series Graphics Cards

Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.

THOUGHTFUL DESIGN
Detailed Features


COOLING COMPATIBILITY
Best Cooling Design

Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
Supports 360mm radiators at the front and top simultaneously.
Up to 10 fans simultaneously.

STORAGE COMPATIBILITY
Modular Drive Trays

Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.

CASE COMPATIBILITY
Extensive Interior

Motherboard support E-ATX (≤ 285 mm), ATX, Micro-ATX, ITX
CPU cooler max height ≤ 175mm
GPU max length ≤ 440mm
Power Supply max length ≤ 245 mm (with HDD), ≤ 440 mm (without HDD)
 

Design
Maximum PSU length 44 cm
Maximum graphics card length 40 cm
Maximum CPU cooler height 17.5 cm
On/off button Yes
Reset button Yes
RGB control button Yes
Anti-dust filter Yes
Tempered glass panel(s) Yes
Illumination colour Amber, Blue, Green, Red
Illumination Yes
Number of expansion slots 8
Number of 2.5" bays 3
Number of 3.5" bays 2
Supported motherboard form factors ATX, EATX, ITX, micro ATX
Product colour Black
Material Glass, Plastic, Steel
Type PC
Form factor Full Tower
Power supply
Power supply shroud Yes
Power supply included Yes
Ports & interfaces
Combo headphone/mic port Yes
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 1
USB 2.0 ports quantity 2
Cooling
Top radiator sizes supported 120 mm
Rear radiator sizes supported 120,140,240,280,360 mm
Front radiator sizes supported 120,140,240,280,360,420 mm
Top fans diameters supported 120,140 mm
Number of top fans supported (max) 3
Rear fans diameters supported 120 mm
Number of rear fans supported (max) 1
Rear fans installed 1x 120 mm
Front fans diameters supported 120,140 mm
Number of front fans supported (max) 3
Front fans installed 3x 140 mm
Storage
Supported HDD sizes 2.5,3.5"
Technical details
Warranty period 2 year(s)
Weight & dimensions
Weight 13 kg
Height 522 mm
Depth 522 mm
Width 230 mm
Packaging data
Package weight 15.3 kg
$70.39

Original: $201.12

-65%
Antec Performance 1 FT ARGB - EATX Full Tower Case in Black

$201.12

$70.39

Product Information

Shipping & Returns

Description

Full Tower, E-ATX, ATX, Micro-ATX, ITX, Steel + Plastic + Glass, 522 x 230 x 522 mm (DWH)

SYSTEM STATUS WITH A GLANCE
Temperature Display

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.

The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.

Attention: The Antec iUinity software must be installed.

ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.

I/O Panel
- Including the mainstream Type-C(10Gbps) port for high-speed transfer.
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.

PC SHOWCASE
4mm tempered glass & perforated solid steel

Left panel adopts tempered glass for better PC showcase visual effects.
Right solid panel is bottom-perforated to enhance heat dissipation and ventilation.

EVERYTHING ORGANIZED
Cable Management on Point

Spacious cable management for efficient wire organization.

There are ten sets of velcro straps for easy cable management.
1. Three sets of velcro straps for fan & I/O cable routing.
2. Five velcro straps for hardware and power supply cables.
3. Two velcro straps at the rear for rear I/O cable routing.

Easy Installation
Removable Top Cooling Bracket

PRE-INSTALLED4 x TRANQUILSILENT ARGB FANS

MORE TRANQUIL, MORE AIRFLOW

Unique fan blade and frame design offers powerful airflow with low noise accomplished.

Exquisite craftsmanship
Minimal clearance between fan frame and blades,
achieving maximum operational efficiency.

Vibration-Absorbing & Anti-Noise Pads
Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.

BEST DUST PREVENTION DESIGN
Exquisite Steel Mesh

The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.

POWERFUL AIRFLOW PATH DESIGN
Best Airflow Path for GPU Cooling

Airflow-enhancing mesh front panel provides massive air.

Ample mesh at the bottom and bottom-right side, and the availability of fans installed on the meshed PSU shroud together provide the best performance for the GPU cooling.

- Top: Magnetic dust filter
- Front: Magnetic & clip-on dust filter
- Bottom: Full-sized pull-out dust filter
- Side: Magnetic dust filter

HIGHLY COMPATIBLE FULL-TOWER PC CASE
Supports RTX 40 Series Graphics Cards

Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.

THOUGHTFUL DESIGN
Detailed Features


COOLING COMPATIBILITY
Best Cooling Design

Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
Supports 360mm radiators at the front and top simultaneously.
Up to 10 fans simultaneously.

STORAGE COMPATIBILITY
Modular Drive Trays

Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.

CASE COMPATIBILITY
Extensive Interior

Motherboard support E-ATX (≤ 285 mm), ATX, Micro-ATX, ITX
CPU cooler max height ≤ 175mm
GPU max length ≤ 440mm
Power Supply max length ≤ 245 mm (with HDD), ≤ 440 mm (without HDD)
 

Design
Maximum PSU length 44 cm
Maximum graphics card length 40 cm
Maximum CPU cooler height 17.5 cm
On/off button Yes
Reset button Yes
RGB control button Yes
Anti-dust filter Yes
Tempered glass panel(s) Yes
Illumination colour Amber, Blue, Green, Red
Illumination Yes
Number of expansion slots 8
Number of 2.5" bays 3
Number of 3.5" bays 2
Supported motherboard form factors ATX, EATX, ITX, micro ATX
Product colour Black
Material Glass, Plastic, Steel
Type PC
Form factor Full Tower
Power supply
Power supply shroud Yes
Power supply included Yes
Ports & interfaces
Combo headphone/mic port Yes
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 1
USB 2.0 ports quantity 2
Cooling
Top radiator sizes supported 120 mm
Rear radiator sizes supported 120,140,240,280,360 mm
Front radiator sizes supported 120,140,240,280,360,420 mm
Top fans diameters supported 120,140 mm
Number of top fans supported (max) 3
Rear fans diameters supported 120 mm
Number of rear fans supported (max) 1
Rear fans installed 1x 120 mm
Front fans diameters supported 120,140 mm
Number of front fans supported (max) 3
Front fans installed 3x 140 mm
Storage
Supported HDD sizes 2.5,3.5"
Technical details
Warranty period 2 year(s)
Weight & dimensions
Weight 13 kg
Height 522 mm
Depth 522 mm
Width 230 mm
Packaging data
Package weight 15.3 kg
Antec Performance 1 FT ARGB - EATX Full Tower Case in Black | Clove Technology